E-Rack Ramp

No heavy lifting required

WORKS WITH THE EZIGRIP E-RACK

HELPS TO ROLL BIKES INTO PLACE

ROBUST STEEL CONSTRUCTION

SKU: 7PERAMP
E-Rack Ramp Product Shot
No heavy lifting required
The E-Rack Ramp simply connects to the end of the E-Rack wheel tray, allowing you to push the bike up the ramp into position.
Part number:
7PERAMP
In a pack:
Ramp, hardware, manual
Fit:
Compatible with E-Rack, E-Rack 2020 and E-Rack 2
Dimensions:
1000 mm L x 125 mm W x 67 mm D
  • No lifting heavy e-bikes with the E-Rack Ramp.
  • Simply roll the e-bike up the ramp.
  • Position the e-bike on the rack without taking weight.
  • The ramp simply clips into place on the wheel tray.
    Step 1:
    Assemble the ramp. Using the provided M6 nuts and bolts, fit the two halves of the ramp together. Use the provided wingnut to tighten the M6 nuts.
    Assemble the two halves of the e-bike ramp
    Step 2:
    Insert the ramp into the wheel tray of the E-Rack – insert the rack in the wheel tray that will support the rear wheel of the bike. The ramp slots into position using two shallow hooks at the end of the ramp. The rubber feet at the base of the rack should rest on the ground.
    The ramp slots into the E-rack to allow you to roll your ebike into place
    Step 3:
    Roll the bike up the ramp so the rear wheel of the bike sits in the wheel tray that supports the ramp.
    Roll rather than lift your ebike into place using the E-rack Ramp
    Our racks are available in all good bike shops across New Zealand and Australia. Support your local bike shop - just find out who they are here: